Calculus/Further integration techniques
We have already considered two major techniques we can use to solve integration problems, that of the method of substitution, and integration by parts.
Here we make use of these techniques to help us integrate complicated integrals.
Partial fractions
First, an example. Suppose we want to find . One way to do this is to simplify the integrand by finding constants and so that
This can be done by cross multiplying the fraction which gives As both sides have the same denominator we must have . This is an equation for so must hold whatever value is. If we put in we get and putting gives so . So we see that
Returning to the original integral
= =
Rewriting the integrand as a sum of simpler fractions has allowed us to reduce the initial integral to a sum of simpler integrals. In fact this method works to integrate any rational function.
Method of Partial Fractions:
- Step 1 Use long division to ensure that the degree of less than the degree of .
- Step 2 Factor Q(x) as far as possible.
- Step 3 Write down the correct form for the partial fraction decomposition (see below) and cross multiply to find the constants.
To factor Q(x) we have to write it as a product of linear factors (of the form ) and irreducible quadratic factors (of the form with ).
Some of the factors could be repeated. For instance if we factor as
It is important that in each quadratic factor we have , otherwise it is possible to factor that quadratic piece further. For example if then we can write
We will now show how to write
as a sum of terms of the form
- and
Exactly how to do this depends on the factorization of and we now give four cases that can occur.
Case (a) Q(x) is a product of linear factors with no repeats.
This means that where no factor is repeated and no factor is a multiple of another.
For each linear term we write down something of the form , so in total we write
Example 1
Find
Here we have and Q(x) is a product of linear factors. So we write
Multiply both sides by the denominator
Substitute in three values of x to get three equations for the unknown constants,
so , and
We can now integrate the left hand side.
Case (b) Q(x) is a product of linear factors some of which are repeated.
If appears in the factorisation of k-times. Then instead of writing the piece we use the more complicated expression
Example 2
Find
Here P(x)=1" and "Q(x)=(x+1)(x+2)2 We write
Multiply both sides by the denominator
Substitute in three values of x to get 3 equations for the unknown constants,
so A=1, B=-1, C=-1, and
We can now integrate the left hand side.
Case (c) Q(x) contains some quadratic pieces which are not repeated.
If appears we use
Case (d) Q(x) contains some repeated quadratic factors.
If appears k-times then use
Trigonometric Substitution
If the integrand contains a single factor of one of the forms we can try a trigonometric substitution.
- If the integrand contains let and use the identity
- If the integrand contains let and use the identity
- If the integrand contains let and use the identity
Sine substitution

If the integrand contains a piece of the form we use the substitution
This will transform the integrand to a trigonometic function. If the new integrand can't be integrated on sight then the tan-half-angle substitution described below will generally transform it into a more tractable algebraic integrand.
Eg, if the integrand is √(1-x2),
If the integrand is √(1+x)/√(1-x), we can rewrite it as
Then we can make the substitution
Tangent substitution

When the integrand contains a piece of the form we use the substitution
E.g, if the integrand is (x2+a2)-3/2 then on making this substitution we find
If the integral is
then on making this substitution we find
After integrating by parts, and using trigonometric identities, we've ended up with an expression involving the original integral. In cases like this we must now rearrange the equation so that the original integral is on one side only
As we would expect from the integrand, this is approximately z2/2 for large z.
Secant substitution

If the integrand contains a factor of the form we use the substitution
Example 1
Find
Example 2
Find
We can now integrate by parts
Trigonometric integrals
Powers of Sine and Cosine
We will give a general method to solve generally integrands of the form cosm (x)sinn(x). First let us work through an example.
Notice that the integrand contains an odd power of cos. So rewrite it as
We can solve this by making the substitution u = sin(x) so du = cos(x) dx. Then we can write the whole integrand in terms of u by using the identity
- cos(x)2 = 1 - sin2(x)=1-u2.
So
This method works whenever there is an odd power of sine or cosine.
To evaluate when either m or n is odd.
- If m is odd substitute u=sin x and use the identity cos2x = 1 - sin2x=1-u2.
- If n is odd substitute u=cos x and use the identity sin2x = 1 - cos2x=1-u2.
Example
Find .
As there is an odd power of sin we let so du = - sin(x)dx. Notice that when x=0 we have u=cos(0)=1 and when we have .
When both m and n are even things get a little more complicated.
To evaluate when both m and n are even.
Use the identities sin2x = 1/2 (1- cos 2x) and cos2x = 1/2 (1+ cos 2x).
Example
Find
As sin2x = 1/2 (1- cos 2x) and cos2x = 1/2 (1+ cos 2x) we have
and expanding, the integrand becomes
Using the multiple angle identities
then we obtain on evaluating
Powers of Tan and Secant
To evaluate .
Example 1
Find .
There is an even power of . Substituting gives so
Example 2
Find .
Let so . Then
Example 3
Find .
The trick to do this is to multiply and divide by the same thing like this:
Making the substitution so
More trigonometric combinations
For the integrals or or use the identities
Example 1
Find
We can use the fact that sin a cos b=(1/2)(sin(a+b)+sin(a-b)), so
Now use the oddness property of sin(x) to simplify
And now we can integrate
Example 2
Find:.
Using the identities
Then
Reduction formula
A reduction formula is one that enables us to solve an integral problem by reducing it to a problem of solving an easier integral problem, and then reducing that to the problem of solving an easier problem, and so on.
For example, if we let
Integration by parts allows us to simplify this to
which is our desired reduction formula. Note that we stop at
- .
Similarly, if we let
then integration by parts lets us simplify this to
Using the trigonometric identity, tan2=sec2-1, we can now write
Rearranging, we get
Note that we stop at n=1 or 2 if n is odd or even respectively.
As in these two examples, integrating by parts when the integrand contains a power often results in a reduction formula.
Rational functions in Sine and Cosine
The "tan half angle" substitution
Another useful change of variables is
With this transformation, using the double-angle trig identities,
This transforms a trigonometric integral into a algebraic integral, which may be easier to integrate.
For example, if the integrand is 1/(1 + sin x ) then
This method can be used to further simplify trigonometric integrals produced by the changes of variables described earlier.
For example, if we are considering the integral
we can first use the substition x= sin θ, which gives
then use the tan-half-angle substition to obtain
In effect, we've removed the square root from the original integrand. We could do this with a single change of variables, but doing it in two steps gives us the opportunity of doing the trigonometric integral another way.
Having done this, we can split the new integrand into partial fractions, and integrate.
This result can be further simplified by use of the identities
ultimately leading to
In principle, this approach will work with any integrand which is the square root of a quadratic multiplied by the ratio of two polynomials. However, it should not be applied automatically.
E.g, in this last example, once we deduced
we could have used the double angle formulae, since this contains only even powers of cos and sin. Doing that gives
Using tan-half-angle on this new, simpler, integrand gives
This can be integrated on sight to give
This is the same result as before, but obtained with less algebra, which shows why it is best to look for the most straightforward methods at every stage.
A more direct way of evaluating the integral I is to substitute t = tan θ right from the start, which will directly bring us to the line
above. More generally, the substitution t = tan x gives us
so this substitution is the preferable one to use if the integrand is such that all the square roots would disappear after substitution, as is the case in the above integral.
Alternate Method
In general, to evaluate integrals of the form
- ,
it is extremely tedious to use the aforementioned "tan half angle" substitution directly, as one easily ends up with a rational function with a 4th degree denominator. Instead, we may first write the numerator as
- .
Then the integral can be written as
which can be evaluated much more easily.
Example
Evaluate .
Let
- .
Then
- .
Comparing coefficients of cos x, sin x and the constants on both sides, we obtain
yielding p = q = 1/2, r = 2. Substituting back into the integrand,
- .
The last integral can now be evaluated using the "tan half angle" substitution described above, and we obtain
- .
The original integral is thus
- .
Irrational functions
Integration of irrational functions is more difficult than rational functions, and many cannot be done. However, there are some particular types that can be reduced to rational forms by suitable substitutions.
Type 1
Integrand contains
Use the substitution .
Example
Find .
Type 2
Integral is of the form
Write as .
Example
Find .
Type 3
Integrand contains , or
This was discussed in "trigonometric substitutions above". Here is a summary:
- For , use .
- For , use .
- For , use .
Type 4
Integral is of the form
Use the substitution .
Example
Find .
Type 5
Other rational expressions with the irrational function
- If , we can use .
- If , we can use .
- If can be factorised as , we can use .
- If and can be factorised as , we can use ,