HSE Partial Fractions

From testwiki
Jump to navigation Jump to search

Template:High School Mathematics Extensions TOC

Method of Partial Fractions

Template:High School Mathematics Extensions/Supplementary/TOC

Introduction

Before we begin, consider the following: 11×2+12×3+13×4......+199×100

How do we calculate this sum? At first glance it may seem difficult, but if you think carefully you will find: 14×5=544×5=54×544×5=1415

Thus the original problem can be rewritten as follows,

=1112+1213+1314......199+1991100

So all terms except the first and the last cancelled out, and therefore

=11100=99100

In fact, you've just done partial fractions! Partial fractions is a method of breaking down complex fractions that involve products into sums of simpler fractions.

Method

So, how do we do partial fractions? Look at the example below:
4z5z23z+2

Factorize the denominator.
4z5(z1)(z2)

Then we suppose we can break it down into the fractions with denominator (z-1) and (z-2) respectively. We let their numerators be a and b.
4z5(z1)(z2)az1+bz2

4z5(z1)(z2)a(z2)(z1)(z2)+b(z1)(z1)(z2)

4z5(z1)(z2)az2a+bzb(z1)(z2)

4z5(z1)(z2)(a+b)z(2a+b)(z1)(z2)

4z5(a+b)z(2a+b)

Therefore by matching coefficients of like power of z, we have:

{a+b=4...(1)2a+b=5...(2)

(2)-(1):a=1

Substitute a=1 into (1):b=3

Therefore
4z5z23z+2=1z1+3z2

(Need Exercises!)


More on partial fraction

Repeated factors

On the last section we have talked about factorizing the denominator, and have each factor as the denominators of each term. But what happens when there are repeating factors? Can we apply the same method? See the example below:

4x1(x+2)2(x1)

Ax+2+Bx+2+Cx1

A+Bx+2+Cx1

(A+B)(x1)(x+2)(x1)+C(x+2)(x+2)(x1)

(A+B)(x1)+C(x+2)(x+2)(x1)

(A+B+C)x+(2CAB)(x+2)(x1)

Indeed, a factor is missing! Can we multiply both the denominator and the numerator by that factor? No! Because the numerator is of degree 1, multiplying with a linear factor will make it become degree 2! (You may think:can't we set A+B+C=0? Yes, but by substituting A+B=-C, you will find out that this is impossible)

From the above failed example, we see that the old method of partial fraction seems not to be working. You may ask, can we actually break it down? Yes, but before we finally attack this problem, let's look at the denominators at more detail.

Consider the following example:
12372+1257 =222572+72572 =22+72572
We can see that the power of a prime factor in the product denominator is the maximum power of that prime factor in all term's denominator.

Similarly, let there be factor P1,P2,...,Pn, then we may have in general case:
AP1α1P2α2...Pnαn+BP1β1P2β2...Pnβn+...ZP1ζ1P2ζ2...Pnζn
If we turn it into one big fraction, the denominator will be:
P1max(α1,β1,...,ζ1)P2max(α2,β2,...,ζ2)...Pnmax(αn,βn,...,ζn)

Back to our example, since the factor (x+2) has a power of 2, at least one of the term has (x+2)2 as the denominator's factor. You may then try as follows:

4x1(x+2)2(x1)

A(x+2)2+Bx1

A(x1)(x+2)2(x1)+B(x+2)2(x+2)2(x1)

A(x1)+B(x+2)2(x+2)2(x1)

AxA+Bx2+4Bx+4B(x+2)2(x1)

Bx2+(A+4B)x+(4BA)(x+2)2(x1)

But again, we can't set B=0, since that would means the latter term is 0! What is missing? To handle it properly, let's use a table to show all possible combinations of the denominator:

Possible combinations of denominator
Power of (x+2) Power of (x-1) Result Used?
0 0 1 Not useful
1 0 (x+2) Not used
2 0 (x+2)^2 Used
0 1 (x-1) Used
1 1 (x+2)(x-1) Not useful
2 1 (x+2)^2(x-1) Not useful

So, we now know that X/(x+2) is missing, we can finally happily get the answer:

4x1(x+2)2(x1)

A(x+2)2+Bx+2+Cx1

A(x1)(x+2)2(x1)+B(x+2)(x1)(x+2)2(x1)+C(x+2)2(x+2)2(x1)

A(x1)+B(x2+x2)+C(x2+4x+4)(x+2)2(x1)

(B+C)x2+(A+B+4C)x(A+2B4C)(x+2)2(x1)

Therefore by matching coefficient of like power of x, we have


As a conclusion, for a repeated factor of power n, we will have n terms with their denominator being X^n, X^(n-1), ...,X^2, X

Works continuing, don't distrub :)

Alternate method for repeated factors

Other than the method suggested above, we would like to use another approach to handle the problem. We first leave out some factor to make it into non-repeated form, do partial fraction on it, then multiply the factor back, then apply partial fraction on the 2 fractions.

4x1(x+2)2(x1)

1x+2×4x1(x+2)(x1)

Then we do partial fraction on the latter part:

4x1(x+2)(x1)Ax+2+Bx1

4x1(x+2)(x1)A(x1)(x+2)(x1)+B(x+2)(x+2)(x1)

4x1(x+2)(x1)A(x1)+B(x+2)(x+2)(x1)

4x1(x+2)(x1)(A+B)x+(2BA)(x+2)(x1)

4x1(A+B)x+(2BA)

By matching coefficients of like powers of x, we have

{A+B=4...(1)2BA=1...(2)

Substitute A=4-B into (2),

2B(4B)=1

Hence B = 1 and A = 3.

We carry on:

1x+2×(3x+2+1x1)

3(x+2)2+1(x+2)(x1)

Now we do partial fraction once more:

1(x+2)(x1)Ax+2+Bx1

1(x+2)(x1)A(x1)(x+2)(x1)+B(x+2)(x+2)(x1)

1(x+2)(x1)A(x1)+B(x+2)(x+2)(x1)

1(x+2)(x1)(A+B)x+(2BA)(x+2)(x1)

0x+1(A+B)x+(2BA)

By matching coefficients of like powers of x , we have:

{A+B=0...(1)2BA=1...(2)

Substitute A=-B into (2), we have:

2B-(-B) = 1

Hence B=1/3 and A=-1/3

So finally,

4x1(x+2)2(x1)3(x+2)213(x+2)+13(x1)